Nikel murni 200 / Uns No2200 Kawat 0,25mm
Nikel murni 200 / Uns No2200 Kawat 0,25mm
Kelas: Ni200, Ni201, N4, N6
ductility tinggi
lalawanan korosi alus teuing
kakuatan mékanis alus
Pedaran alloy
Nikel 200/201 kelas paling loba dipaké, umumna dieusian pikeun caps transistor, anoda pikeun tabung éléktronik, lead komponén éléktronik / Lead-in-Kawat pikeun lampu jeung Wire-Mesh. Ogé dipaké dina formulir strip pikeun sagala rupa aplikasi kaasup accu Ni-Cd.
Kaayaan Pasokan
Nikel 200, 201 sareng 205 disayogikeun dina kaayaan ieu:
Ditarik Tiis, Watek Husus.
Tiis Digambar, Anil. Straightened na Cut Panjangna.
Catetan:
NUS N02201 (ASTM B 162) sami sareng N4 (GB / T 2054).
NUS N02200 (ASTM B 162) sarua jeung N6 (GB / T 2054).
Wangun
Coil - Strip, Foil, Pita
Kawat - Profil, buleud, datar, pasagi
rod, bar, forgings, piring, lambar
Komposisi kimiawi
| Kelas | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
| N4 | 99.9 | 0,015 | 0.03 | 0.002 | 0.01 | 0.01 | 0,001 | 0,001 | 0.04 |
| N6 | 99.6 | 0.10 | 0.10 | 0.05 | 0.10 | 0.10 | 0,005 | 0.002 | 0.10 |
| Ni201 | 99.0 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
| Ni200 | 99.0 | 0.20 | 0.30 | 0.30 | 0.15 | / | 0.01 | / | 0.40 |
Kamampuh Foil nikel
| Kelas | Jalur Nikel Murni 99,6% / 99,9% |
| Kandelna | 0,002 ka 2,50 mm |
| Toleransi | +/- 5% (toleransi khusus sayogi) |
| Lebar | Nepi ka 350mm rubak |
| Ukuran coil | Nepi ka 80 kg tanpa welds |
| Rentang Watek | Annealed ka Full Hard |
Nikel Foil Produk Precision
| Kandelna | Kandelna sangu | Burr jangkungna | wengkuan lebar jeung toleransi | |||||
| 2≤w<10 | 10≤w<50 | 50≤w<100 | 100≤w<150 | 150≤w<200 | 200≤w | |||
| 0,02≤t <0,05 | ± 0,003 | ≤0,005 | ± 0.05 | ± 0,10 | ± 0,15 | ± 0,20 | ± 0.30 | ± 0,50 |
| 0,05≤t <0,1 | ± 0,005 | ≤0.01 | ||||||
| 0.1≤t <0.2 | ± 0,008 | ≤0,015 | ||||||
| 0.2≤t <0.3 | ± 0,012 | ≤0.02 | ||||||
| 0.3≤t <0.4 | ± 0,015 | ≤0.03 | ± 0.10 | ±015 | ± 0,25 | ± 0,50 | ± 0,80 | ± 1.00 |
| 0.4≤t <0.6 | ± 0,025 | ≤0.05 | ||||||
| 0.6≤t <0.8 | ± 0,030 | ≤0.06 | ± 0.30 | ± 0,40 | ± 0,50 | ± 0,50 | ± 0,80 | ± 1.00 |
| 0.8≤t <1.0 | ± 0,040 | |||||||
| 1.0≤t <1.2 | ± 0,050 | ≤0.08 | ± 0.50 | ± 0,50 | ± 0,80 | ± 1.00 | ± 1.00 | ± 1,50 |
| 1.2≤t<1.4 | ± 0,060 | |||||||
| 1.4≤t<1.7 | ± 0,070 | ≤0.10 | ||||||
| 1.7≤t<2.0 | ± 0,080 | |||||||
